It’s nearing springs or winter and your gutters are still clogged up. What size ladder to clean gutters do you need?
Most gutters are raised depending on the size of your house and as you select your choice, it is important to understand which size to go for.
As you work on the gutters, it is also very important to think more about your safety too. Working on the gutters is not an easy task and requires a ladder that will offer utmost stability besides getting you on the roof.
There are different house sizes ranging from 1 and 2 story buildings each requiring a special kind of ladder.
What size ladder to clean gutters?- The Best Guide for Single and a 2-Story building
Below is some basic information that will help you choose the right size ladder for cleaning gutters.
If your house is a one-story building, the average height of your gutters is about 11 ft. from the ground. This best set of ladder you can buy should range 12.5-13 ft. but consider that some length will be lost due to leaning or extension. This means you should buy a ladder ranging from 15-17 ft. high.
For a 2 story building, the approximate height from the ground is 15.4 ft. ideally it is twice the height of a single-story building. However, this height varies depending on the building but the lower limit is 18 ft.
To achieve a good and comfortable working height, you will need a ladder of at least 18-22 ft. high.
Selecting Gutter Cleaning Ladders.
For the ladders to clean gutters, there are several factors that I have considered which will be very helpful for you too.
First, consider the height of the house is before any other feature. A good ladder should make you reach the desired heights without straining.
This is means the ladder height must be sufficiently long enough to give you a comfortable working height.
Another factor for the right ladder size is the factor of leaning and adjusting the ladder. Chance are, when you lean a ladder or adjust it, some considerable length will be lost and therefore the need to get a ladder exceeding the gutter height.
Finally, consider where you are setting the ladder. Sometimes the ground may not be leveled and when setting it properly, some height is lost. I have categorized the ladders into two; those with adjustable legs and those without.
Below is a list of the best size ladders for cleaning gutters.
Single-story ladders for cleaning gutters
This is a versatile ladder that you can use on multiple tasks including cleaning the gutters. You can convert this ladder into an A-Frame ladder, extension ladder, 90 degrees ladder, staircase ladder, or a scaffolding system.
Alta-One ladder is made of high-grade airplane aluminum that is both lightweight and also very durable. It is easily portable from one point to another. It is also fitted with wheels that are helpful when moving the ladder and also when you want to keep the ladder level.
This model extends to 15 ft. and a 17 ft. working height which is quite enough to work on one-story building gutters. It can also carry a load of 250 pounds and has met all the ANSI & OSHA safety standards.
Its legs are wide and flared and at the same time rubberized to offer maximum feet support and also make you feel safe as you climb. It is also built with hinge locks that enhance safety and minimize the chance of involuntary retraction.
The ladder has non-slip feet and the ladder can last long because it if s rust proof.
This ladder is particularly preferred by contractors and professionals. As a homeowner, you can use it too to size ladder to clean gutters on your one-story building.
One notable feature of this ladder is that it retracts and extends very easily. Additionally, it is designed with a no-pinch system and you don’t need to fear hurting your fingers.
Another feature is that the ladder can retract compactly to make a good storage height. You can also use the closure strap that integrates with the handle to make it easily portable.
It is made with high-quality aluminum that is also iodized to make it more durable and long-lasting.
You can extend this ladder to a height of 15.5 ft. and has a weight capacity of 250 pounds. It has been approved by OSHA and meets the ANSI type 1 ladder.
2-story size ladders to clean gutters
When you need size ladders to clean gutters from the 2 story building, this is the most appropriate ladder. It is versatile and can be converted into different configurations like an extension ladder, a 90-degree ladder, a step ladder, a staircase ladder, and a trestle & plank ladder.
It is also designed with quad lock hinges and rock locks that enable quick and easy configuration.
From among the 300 pounds ladder, this is so far the lightest ladder. It is designed with airplane-grade aluminum that makes it both lightweight and durable.
The in-built levelers, enhance its capacity to level on sloppy grounds. Alternatively, they are making the ladder retract fast after working.
You can extend this ladder to a height of 22 ft. to reach any gutters in any 2-story building.
If you prefer working with an extension ladder, this Louisville will be a great deal for you. Though this ladder is 24ft it extends to a height of 21 ft. This is to means the ladder can comfortably work on gutters on a second floor.
The ladder is made of fiberglass material which is strong and stable too. The fiberglass is non-conductive and you can use it even on electrical jobs and roofing too among others.
The D-shaped rungs help to keep your feet sturdy when you are climbing. Its end caps are also resistant to marring and keeping the ladder stable.
It is designed to hold a weight of 300 pounds with an ANSI Type 1A rating and OSHA certified.
It has slide guides that control involuntary extension and retraction.
I hope I have answered the question of what size ladder to clean gutters. The list above has categorized some of the best that you can use for this purpose. You can buy any of the above depending on the size of your house and gutters.